Wanting to buy a LaRue 12.0 LAT rail. Condition doesn't really matter.

BCM BFH 11.5" barrel, 120 rounds through it. $190 + shipping. Bipod and SOPMOD stock are SOLD. As far as trades go: LaRue 12.0 LAT Handguard Colt M4 upper KAC rifle length/MK12 FFRAS Ops Inc/AE Muzzle Brakes

Tanodized Trijicon ACOG Doctor mount.

BCM BFH 11.5" cold hammer forged barrel. Under 120 rounds through it.

PSA 7.5" 300 blackout barrel with gas block and tube, SOLD LaRue 1" rings for SPR series mounts, $30 LaRue FUG vertical grip in UDE, $65

ALL SOLD

2x Armorworks ESBI plates and 1x Eagle pouch. $SOLD 3x like new Eagle RLCS dual M4 mag pouches, $15 each + shipping.

Colt M16A1 FCG, selector, and sear. No pins, in excellent condition. $100 shipped.

Wanted: 1" diameter KAC 1.5" height rings, LaRue old style "2 screw" 1"/30mm rings or mounts, Armalite M15 fiberglass free float tube

EoTech XPS-2FN, in good condition. Looking to trade for (SOLD)

Colt 10.3" MK18 Mod 0/CQBR upper. Colt 10.3" barrel (factory 10.3", not cut down), KAC M4QD/NT4 flash suppressor, Colt BCG (C marked carrier, CMP bolt), Colt cage code charging handle, Colt side swivel assembly, Matech BUIS, KAC RAS (a little salty) with three panels, and a cool guy CAG Gangsta Grip. Upper is a Colt Expanse (which means who the hell knows where Colt sourced it) with no T-Marks and a ridiculously tight fit to about 90% of the lowers out there. Available to the buyer are an OG Aimpoint Comp (circa early 90's) in a KAC Straight mount, and a Surefire M95LT-SU06 (fat body M95x with a LaRue mount and SU tapeswitch).

Knight's factory 14.5" SR15E3 Mod 2 MLOK upper, non-pinned KAC QDC 3-prong, KAC charging handle. Message for more pics or info. SOLD

Colt CAGE code 9mm SMG stripped upper, new, only mocked up with a barrel and hg. Never fired. No trades.

Colt 10.3" factory (not cut down, CAGE marked under HGs, 2018 date code) barrel, KAC NT4 flash suppressor, Colt CAGE code marked charging handle, BCM upper, MaTech rear sight, Colt side sling swivel, and a salty KAC RAS with 2 long panels, an 8-rib panel, and a KAC vertical grip. No BCG (but I have a Colt BCG I could toss in at a *very* attractive price). Less than 100 rounds through it. $750 OBO. Not looking for any trades at this time. The Aimpoint Comp (early 90's) is not included (the KAC mount just sold) but I've got it and some other GWOT era stuff I could throw in for good price (Fat body SF M95xXM, A2 Gangsta Grip, etc). Shoot me a message with your # or email address and I can get you more pics, or additional info.

Colt CAGE code marked charging handle SOLD; Colt M4 side sling swivel $30; Salty KAC RAS (Titusville) $SOLD; KAC vertical grip (Titusville) SOLD; Surefire old school fat body M952XM (NO MOUNT) $80. $100 and the whole lot is yours. Feel free to make an offer if you want multiple items.

BCM upper, used, in good shape. Complete with FA and dust cover. No trades. SOLD

Colt 10.3" MK18 barrel. This came from Colt as a 10.3" with a factory installed FSB, it is not a cut down M4 barrel. CAGE code and "M P 5.56 NATO 1/7" marked, 06/18 date stamped. Delta ring, barrel nut, and gas tube are all Colt, as are the included M4 handguards. Less than 100 rounds through it (MK18s just aren't my thing), so it's in great shape. The ONLY things I need in trade are a Knights 99166/20214 FF RAS Medium, or a tanodized or "Patents Pending" marked PRI Gasbuster.

Aimpoint T1 Micro, great shape. Got it in trade, but I'm trying to fund another optic. Comes with bikini cap, and the pictured OEM low mount. Not looking for trades at the moment.

Colt Cage Code M4 upper, brand new, never used.

Ultimak M1B for stamped AK, $SOLD. ATI AK lower handguard, folding/collapsing buttstock, black polymer pistol grip, and trigger/hammer/disconnect with pins, $50.

Colt M4 side swivel, complete, $SOLD. Magpul ODG MBUS2, $SOLD, PWS Triad closed tine flash suppressor $SOLD.

Streamlight TLR-6 light/laser combo for Springfield XD/XDM, $SOLD. Samson gas block height front sight, painted, missing mount hardware (screw and clamp), $SOLD

Steiner P4xi 1-4 in a LaRue 1.93 mount, good shape. I've got like 4 of these, and I only *really* need 3 so... $550 without the mount, $725 with it.

ATN NVG-7. Gen 2 tube, pretty clean image. IR illuminator doesn't work, but aside from that they work fine. PM me for through the tube pics.

Trijicon 1-4x Accupower, Red Segmented Circle reticle, great shape. No trades.

Knight's Armament M110 30mm scope mount, taupe, great shape. No trades.

Surefire M952XM, like new. Comes with ARMS #17 mount, IR filter, and tape switch.

Nightforce .885" low 30mm, 6-screw, Ultralite rings. PN: A264. In great shape aside from some wear on the nuts. Willing to trade for a decent BCG, Aero slickside upper, SOPMOD stock, PRI Gasbuster (regular weenie latch) or a set of tall-ish Leupold MK4 or PRI 1" rings.

KAC NT4 Comp. One is new in wrap one and comes with shims, $SOLD. The other is like new (I think it's unfired) and has no shims, $SOLD. Both prices are shipped.

Aimpoint Comp from the early 90's. It works, but it's not exactly daylight bright anymore. Idk if it's the spring in the cap losing tension, or what, but... Its still old school AF, and plenty bright for an overcast day... And dark colored targets...

ENVIS M703E night vision monocular, Gen 3 tube (no idea what specs, but can provide through the tube photos). One tiny blem that's hard to notice unless you're looking for it. Lens is a Computer 50mm f1.3 lens (acts as a 2x magnifier, the ENVIS uses C-Mount/CCTV lenses which are dirt cheap and easy to swap out). Extremely low hours, it's only had an hour or two on it (I was going to do a Mod3b housing swap, but ended up with another device). Battery housing and battery cap are pristine.

Magpul UBR 2.0, FDE, installed on a gun, had about 30 rounds through it, then went a completely different direction with the build. No buffer spacer (so you've gotta use A5 buffers with 5.56, or standard length CAR/M4 buffers with 308 guns) but otherwise in excellent condition. No trades.

SF WarComp and 3-prong. Both are used. WarComp is $SOLD shipped (includes shims), 3-Prong is $SOLD shipped (no shims). No trades.

Noveske 16" lightweight barrel, mid length, very low round count. Comes with pinned Noveske gas block. Can provide more photos if requested. $SOLD shipped USPS priority, or SOLD shipped with an LMT MPI bolt that was used with it.

Looking for a Bulgarian AKS-74 (or SLR-104/106/107-UR) gas tube. Lmk what you've got.

Discontinued (as far as I can tell) Surefire 3-prong for AK-74/101/102/105. 24mm threads for threading on your FSB, filthy, but still in great functional condition.

Old School Surefire 660 with late 90's Vero Beach era KAC SF mount. Perfect for a CQBR or early M4 build.

Atlas Bipod, brand new, M1913 mount

Polish Tantal trunnion (will work with any AK-74, Tantal, or Beryl bolt), and AKS-74 rear trunnion with latch for side folding stock.

Super old school Surefire 3DL IR illuminator. Perfect companion to a PAQ-4C. $85 with no tailcap, $150 with the tape.

M300V Scout, Arisaka body, SF Z68 clicky tailcap, KM1-C head. IR and white light both work great, mode selection is still smooth, not sticky at all. No mount. I've got a brand new black UE tailcap and SU tape I'd let go (instead of the Z68) for $70 extra.

Surefire Warden QD, never fired. Some small scuffs from inside my safe.

AVS-6 (ANVIS) ocular lens, good, functional shape.

C-Mount ENVIS lens. Excellent, like new condition. Works great with Mod3B or Micro housings.

Black Optex Zero Lens for PVS-14. Mounts in front of a day optic like a poor man's PVS-24. Allows zeroing of the the PVS-14 so you don't have to rezero your day optic. Comes with a mini 3X magnifier for the PVS-14. Its a neat system, but unfortunately won't work with my ABNV Pitbull housing. Has one small ding on the aluminum housing, but is in excellent condition otherwise.

Partial Hungarian Type 3 milled AK kit (original barrel) and reweld bits. FURNITURE NO LONGER INCLUDED. More than enough cut receiver sections to weld up a semi auto receiver with enough left over for a wind chime or something. Salty on the outside, but the chamber, bore, and crown are immaculate. It's been sitting in my kitchen for too long, and I need to get it gone, so...

WANT TO BUY: Old school Austin Precision Products/LaRue Tactical rings (1" or 30mm) and mounts (SPR/1.93, etc with the two-screw rings like above).

Surefire Dual Fuel in tan with KE2-DF bezel/SOLD, SF M300 with KE1F bezel and pic mount, Surefire M300 with KAC M-Lok mount and KE1F bezel.

Ops Inc 12th model 30 Cal 5/8x24 muzzle brake

JP LMOS complete BCG, 5.56 (e-bolt) new.

Egyptian Maadi Arabic marked rear sight base and rear sight base.

80/90's era Colt M16 Carbine/Commando glossy 6-hole handguards. Correct for BHD era clones.

Early style Surefire M500a. Switches, pad, and bulb are all in good shape. OG style round bezel and knurled adapter.

Egyptian Maadi Arabic marked AKM front trunnion and rear sight base.

Hungarian milled AK partial kit, as pictured. Original Hungarian barrel is salty on the outside, but pristine internally. Attached stub is saw cut with intact selector markings. Bunch of torch cut receiver sections included for rewelding.

Colt shiny 6-hole CAR handguards, 6520 takeoffs. Perfect for early 90's (and older) retro clone builds. 1 set still available (8/31/21) OG 90's era Surefire M500a is in good shape, and functional, with all the rubber intact on the buttons.

5 Colt grey anodized "CM" marked A2 uppers with .315 front pinholes, and one keyhole marked A2. Used condition, first come first pick.

Surefire 660 classic tapeswitch, painted, works fine. Great for BHD/Blood Diamond type builds.

WTB: BFG Vickers sling in AOR1. Padded or non. Missed out on the latest run, hoping someone got a spare and can hook a brother up.

WANTED: Looking for a HK MP5/G3/33 A3 Stock locking ring. Spring can be busted, condition can be whatever as long as it will work.

Nightforce 2.5-10x32, mil/mil. Excellent condition, picked it up for a NSW Recce build, but ended up going a different direction. 1.125" NF rings.

Steiner P4xi with P3TR reticle in a LaRue 1.93 QD mount. In great shape, glass is nice and crisp, illumination is bright. $450 without mount, $725 with mount. No trades.

Used Knight's NT4 or M4QD MAMS. Some finish wear from use with an NT4, but otherwise in good shape. No trades

Grey anodized (under some Krylon) PA 1-6 Gen2 FFP, raptor reticle. Aero 30mm extended mount. Great shape, aside from the paint. No trades, unless it's a PA 3x Prism in 5.56.

Lightly used FFRAS Long (it's kinda dusty, but no dings or anything) PN 21318, for MK12 and NSW RECCE builds. Handstop not included. Not looking for trades, just trying to get back what I've got in it. $1025 shipped USPS Priority, PayPal F/F only. I've also got some other Mk12 stuff (KAC Bipod mount, both QD and post sling mounts, unmarked 99051 front sight) that I'd only let go to the buyer of the rail for a fair offer.

Surefire 5.56 FDE trainer, with a mount off of a black one. Swapped the FDE hardware for the black off one on my SF/ASR adapter. In good shape, pretty lightly used. No trades.

Knight's pic rail QD sling mount. Good shape, no QD swivel included.

1.125 height rings, used, with some minor wear marks.

LT SPR 1.93, 30mm, QD Lever. Excellent condition. No trades.

USMC marked KAC 600M Micro Rear BUIS. Great shape. No trades.

Used Holosun 507K-X2, anodizing is worn on the top corners of of the hood, glass is good. No trades.

14.5" Colt C MP barrel, grey ano Colt AF upper, Armalite free float tube, UltraDot Microdot 1.5-4.5x in a Colt OEM one piece mount. The Microdot illumination is bright, but the rheostat is a bit squeaky. Flash suppressor is just hand tight on barrel, and handguard is not torqued down. No gas block or gas tube. This stuff is all pretty much impossible to find, and if you're building a late 90's to early 00's Delta gun this is pretty much it. I've also got a color matched grey ano Armalite upper I'd sell locally with it (SE Texas only, no shipping). I'd be willing to split the upper and optic, but no further unless you're offering something absurd. No trades, and I'm open to *reasonable* offers.